Another day, another rare, custom wheel build. Chris King’s Turquoise components are hard enough to get as it is. Then add some custom colored decals to a set of Enve All Mountain rims and you get a colorful, top notch build.
Here are a set of Chris King ISO hubs. The front is their small diameter disc hub set up for a 15mm through axle fork, the largest axle the small diameter hub will accommodate. They offer a large diameter hub shell for those running the 110mm wide by 20mm diameter axles.
Out back is the now-standard 142mm wide by 12mm diameter rear axle compatible hub. The hubs are laced with Sapim CX-Ray spokes and Enve’s proprietary internal brass nipple to a set of All Mountain Enve hoops.
If you have any questions, contact Michael, our master wheel builder/infinite source of rim-nipple-spoke-hub combination do’s and dont’s. Also, check out our True Love Wheels page, where you can read about Michael’s process and expertise.
As always, thanks for looking and swing by the shop if you want to see some over-the-top rides… or to scoop up the remainder of King’s limited turquoise components!